Quality Certification

Aiming to ensure product’s quality, Giantlight is continuous improvement on process and control on mass production process (prevent any defect or waste). We guarantee only offer the best quality to our customers.
Quality management systems are followed ISO 9001:2000 standard and IATF 16949 certification.
Certification System: EMC, ECE, FMVSS108, CMVSS108, CCC, ADR

  • UNECE

    UNECE

    In order to enter the European market, cars, motorcycles and a variety of components and systems must be certified to meet the basic requirements of traffic safety and environmental protection. E-Mark are the European conformity marks issued by the transport sector, indicating that these products comply with relevant laws and regulations or directives.

    ECE


     

  • EMC2

    EMC2

    For electrical and electronics products, electromagnetic compatibility is a very important technical target. An EMC phenomenon includes electromagnetic compatibility, electromagnetic harassment, noise immunity, and electromagnetic interference. It is not only related to the safety and reliability of the product itself, but also the protection of the electromagnetic environment. Thus, EMC requirements are a very important value for the entrance of products into the international.
    EMC

     

  • CCC

    CCC

    CCC is a compulsory certification of China for the import, export, shipment, sales and using.  Only certified products by CCC can be identified to pass muster with safety, electromagnetic compatibility (EMC) and environmental protection.  
    CCC
     

  • SAE

    SAE

    The standards established by SAE (Society of Automotive Engineers). For all automotive facilities include vehicle, truck, engineer vehicle, aircraft, engine machine, materials and manufacture have to follow regulations. The SAE is an authoritatively standards and widely used by the automotive industry and other industries.
    SAE&DOT
     

  • DOTSEAL

    DOTSEAL

    A regulation for vehicle lamps in USA, which is established by the Federal Government, the products that comply with this regulation shall mark “DOT” on.SAE&DOT
     

  • 220px-JIS_mark.svg

    JIS MARK

    The JIS MARK labeling system is a product certification system. The manufacturer applies for the products manufactured by themselves After the factory inspection (including the quality management system and product testing) of the certification authority registered by the Japanese government, the manufacturer can Labeling JIS MARK on its products or packaging is also a third-party certified product quality assurance system.



     

  • iatf-16949-certification-services

    IATF

    IATF 16949:2016 The requirements of a quality management system for organizations in the automotive industry is based on the ISO 9001:2015 quality management system of the International Automotive Task Force (IATF). The architecture evolved with a set of standards.

    TS16949
     

  • ISO

    ISO 9001:2008 Quality Management System

    ISO: Refers to the International Organization for Standardization.
    9001: 65 years of ISO has been established so far. Over the years, different quality standards have been set for different industries and named for different quality systems.
    2008: This system is a version of the article published by ISO in 2008.

    ISO
     

  • vscc-certification-logo

    VSCC (Vehicle Safety Certification Center)

    The purpose of founding of VSCC is to research vehicle safety regulation and administration system, to assist MOTC by providing services related to vehicle safety certification, and to enhance the vehicle safety in Taiwan.

    VSCC